Frameless & Semi-Frameless · Systems Overview
Glass Railing in Hyderabad
Sun Railings fabricates and installs glass railing for commercial and residential projects across Hyderabad from our factory at IDA Jeedimetla. We supply four systems: frameless glass on spigots or a base channel, semi-frameless glass with stainless steel balustrades, aluminium-profile glass railing, and standoff-fixed glass. Panels are 10–18mm toughened or 6+6+1.52 laminated safety glass, set at the standard 1,050mm finished height. Contractors, EPCs and developers receive shop drawings for approval before fabrication, and each package is supplied and installed as one scope.
Glass railing systems compared
The fixing system decides how the railing looks, how it is installed and what it costs. Most projects use one system for balconies and another for staircases or atria.
| System | How the glass is held | Best suited to | Detail page |
|---|---|---|---|
| Frameless (spigot or base channel) | Glass held only at the base, in SS316 spigots or a continuous channel | Podium terraces, atria, premium balconies | Frameless glass railings · Channel system |
| Semi-frameless SS balustrade | SS304 or SS316 balustrades with glass infill panels | Staircases, corridors, cost-controlled balcony runs | SS glass railing |
| Aluminium profile | Glass set in 6063-T6 aluminium top and bottom profiles | Residential towers, long balcony runs, coloured finishes | Aluminium glass railing |
| Standoff fixed | Glass fixed to the slab edge with stainless standoff fittings | Fascia-mounted guards, feature stairs | Covered on this page |
Which glass is used for glass railing?
Every panel is safety glass. The choice between toughened and laminated depends on what sits below the railing and whether the panel must stay in place if it breaks.
| Glass | Build-up | Where it is used |
|---|---|---|
| Toughened | 10–18mm monolithic, heat-treated | Balconies, interior corridors, most staircases |
| Laminated | 6+6+1.52 (two plies with PVB interlayer) | Atria and voids over occupied areas, hospital public zones |
| Toughened laminated | Toughened plies bonded with PVB | High-traffic public areas such as airport and mall circulation |
How is glass thickness chosen?
Thickness follows the panel width, the fixing system and the load on the guard. The final thickness is confirmed on our shop drawings before glass is ordered. Typical starting points:
| Application | Typical glass |
|---|---|
| Frameless balcony or podium guard | 10–18mm toughened |
| Semi-frameless SS balustrade and glass | 10–12mm toughened |
| Staircase glass balustrade | 10–12mm toughened |
| Atrium or void over occupied floor | Laminated, per shop drawing |
Standard guard height is 1,050mm finished height, including balconies, terraces, voids and staircases.
SS304 or SS316 fittings?
We use SS304 for interior work and SS316 for exterior, coastal or high-humidity locations, including podium terraces and pool decks. See our SS304 vs SS316 guide for the full comparison.
What to confirm before fabrication
Glass is cut and toughened to size, so changes after release are costly. Before we release a package to fabrication, we confirm with the contractor:
- Glass type, thickness and panel sizes for each railing type
- Fixing system and slab-edge or stringer details
- Handrail profile and finish
- Balustrade and fitting grade (SS304 or SS316) and finish
- Floor-wise quantities and dispatch sequence
Documents we submit
For every package, we submit:
- Shop drawings for contractor and consultant approval before fabrication
- SS mill test certificates for the stainless steel used
- Glass toughening and test certificates from the glass processor
- Method statement and QA plan for fabrication and installation
How we fabricate and check
Balustrades, fittings and handrails are fabricated at our Jeedimetla factory, where we have manufactured railings since 2001. Before dispatch, each lot is checked against the approved shop drawings for dimensions, finish and fitting grade, and glass panels are checked for size and marking.
Installation on site
- Site survey and slab-edge measurement
- Shop drawing approval
- Fixing layout marked and anchors installed
- Balustrades, spigots or channels set to line and level
- Glass panels installed and aligned
- Handrail fitted and joints finished
- Final inspection and handover with the contractor
Glass railing for builder and EPC projects
Glass railing is usually one package within a larger finishing scope. We work directly with EPC contractors, main contractors and developers, supplying floor-wise so railing installation keeps pace with the finishing programme. Common locations include tower balconies, podium terraces, atria and voids, lobbies, and feature staircases.
For sector-specific requirements, see IT park railings, hospital railings and metro station railings.
Where our glass railing is installed
- GMR Hyderabad Airport: glass railing in airport public areas
- IKEA Hyderabad: glass railing in the retail store
- Microsoft Hyderabad campus: glass railing on the office campus
See our full project portfolio for more of our railing work.
Glass railing price
Price depends on the system, glass thickness, finish and quantity. Current per-square-foot rates are on our glass railing price page.
Areas we cover
We install across Hyderabad, including Gachibowli, HITEC City, Kondapur, Madhapur, Kokapet, Financial District, Banjara Hills, Jubilee Hills, Kukatpally and Secunderabad, and supply projects across Telangana, Andhra Pradesh and pan-India.
Frequently asked questions
Planning a Glass Railing Project?
Share your drawings or project requirements for technical review and manufacturing consultation.
Share your drawings or project requirements for technical review and manufacturing consultation.