Custom Radius · Jeedimetla
Curved Glass Railing
Custom-radius bent toughened glass railing fabricated at our Jeedimetla facility and installed on site — SS304 or SS316 fittings, 12–16mm glass, supplied and installed as one combined scope.
500+Commercial glass railing projects delivered
25+Years curved fabrication at Jeedimetla
12-16mmToughened glass, radius bent
24hrSite visit anywhere in Hyderabad
Product Range
Curved Glass Railing System Types
01
Curved Post & Panel
SS316 · Custom Radius
Balustrades with bent toughened glass infill following architect radius drawings. Common for hotel atriums and lobby mezzanines.
Custom Radius
02
Curved Frameless Glass
Spigot / Channel
Frameless bent glass balustrades with base-channel or spigot fixing for uninterrupted sightlines.
Architectural Finish
03
Curved Staircase Railing
SS304 · Bent Glass
Curved staircase handrails with bent glass infill for institutional and commercial spiral stair packages.
Commercial Spec
04
Terrace Curved Balustrade
SS316 · Outdoor Spec
Outdoor curved glass balustrades for podium terraces, rooftop decks and pool edge circulation.
Outdoor Grade
Specification
Curved vs Straight Glass Railing
Curved systems require radius-controlled glass bending, custom balustrade fabrication and precise site alignment. Straight panel systems use flat toughened glass between standard balustrades — lower fabrication complexity, no custom curvature.
| Drawing requirement | Straight: standard layout · Curved: architect radius drawing mandatory |
| Glass fabrication | Straight: cut toughened · Curved: heat-bent toughened with QC |
| Typical lead time | Straight: 3-5 working days · Curved: 5-10 working days |
| Minimum radius | Typically 900-1200mm for 12mm bent glass on atrium sweeps; confirmed during technical review |
Project References
Selected Installations
Frequently Asked Questions
Curved Glass Railing — Common Questions
What is curved glass railing?
A balustrade where heat-bent toughened glass panels follow a designed radius, rather than straight faceted panels. Specified at atriums, spiral staircases, podium terraces and curved lobby edges.
What glass thickness is used for curved panels?
Typically 12-15mm toughened glass, depending on radius, span and load. Laminated glass is used where fragment retention is required.
How does curved differ from straight glass railing?
Curved systems require radius-controlled glass bending, custom balustrade fabrication and precise site alignment. Lead time typically runs 5-10 working days versus 3-5 for straight panels.
What SS grade is used?
SS304 for sheltered interiors. SS316 for pool surrounds, humid atriums, outdoor terraces and coastal applications.
Does Sun Railings offer supply-only curved glass railing?
No. Curved glass railing is quoted and executed as a single combined scope covering supply, fabrication and installation.
What is the fabrication lead time?
Technical site visit within 24 hours of enquiry. Custom-radius packages typically complete in 5 to 10 working days at Jeedimetla, depending on radius complexity and glass thickness.
Why Sun Railings
What Sets Us Apart
In-House Curved Fabrication
Custom-radius bent glass fabricated at Jeedimetla, not outsourced to third-party processors.
Drawing-Based Quotation
Scope locked to approved radius drawings, glass thickness and balustrade spacing before fabrication begins.
Named Project References
Hyderabad Metro, Microsoft Hyderabad and IIT Bhilai portfolio references available for review.
Planning a Curved Glass Railing Project?
Share your drawings or project requirements for technical review and manufacturing consultation.
sales@sunrailings.com
Request Consultation
Share your drawings or project requirements for technical review and manufacturing consultation.